Back to all

Fuel Injection Keeps Getting Better for Lockport Motorists

January 6, 2019

Lockport residents know that engines burn fuel to operate. Fuel is pumped from your fuel tank to your engine where it is squirted—or injected—into your engine's cylinders. This is the function of the fuel injectors.

There are two ways to inject fuel into an engine. Fuel needs air to burn, so in the first method, fuel is injected into a port and allowed to mix with airand before it is drawn into the cylinders. In the second method, fuel is injected directly into the cylinders and mixes with air after it enters the engine.

Direct injection engines burn fuel more efficiently than conventional engines. Some models can deliver the power of a V8 with the economy of a V6.

For example, in one family of engines, the conventional version (a V6) delivers about 250 horsepower. The direct injection version delivers over 300 horsepower and gets about the same . The turbocharged version delivers 350 horsepower.

Why the big difference in power? Direct injection systems allow fuel to be squirted into the engine at hundreds of times the pressure of a conventional engine. This atomizes the fuel better (breaks it down into tinier droplets), which means more of it gets burned, which translates to more power for your engine. It also results in cleaner emissions and improved fuel economy.

Fuel injectors are precision instruments. They have to deliver the right amount of fuel at exactly the time the engine needs it. They are also engineered to inject fuel with a specific spray pattern. This spray pattern allows for maximum fuel efficiency and proper atomization.

Direct injection engines require a much higher degree of precision than conventional engines. For this reason, they are equipped with more sophisticated computers.

When fuel injectors get dirty, their precision drops off. The spray pattern won't be precise, and the timing of fuel delivery may be off. This decreases fuel efficiency and fuel economy for Lockport drivers as well as delivering less power to the engine.

Fuel injectors are not cheap to replace. Direct injection fuel injectors are even more expensive. And we're talking a mortgage payment to buy a set of new fuel injectors for a diesel engine.

So keeping your fuel injectors clean is just good auto advice for Lockport residents. The best way to do this is to change your air and fuel filters regularly and practice other habits of good vehicle care and preventive maintenance at Tuffy Tire & Auto Service Center Lockport in Lockport. Cleaning additives in your fuel can also help.

If you do end up with gum or varnish in your fuel system, you'll need a professional fuel system cleaning. This will clean out your whole system, including the injectors. The good news is that with proper maintenance, your fuel injectors will last for a long time.

Tuffy Tire & Auto Service Center Lockport
600 E 9th Street
Lockport, Illinois 60441
815-838-3700

More articles from Tuffy Lockport

Breathe New Life into Your Engine (MAF sensor replacement)

April 21, 2024

If youve noticed your vehicle is hard to start, stalling, or has lost power, the culprit may be a part with an odd name: the MAF sensor. You may have never even heard of a MAF sensor, but its important that it be working correctly, or you may be experiencing some fairly significant engine issues... More

Automotive Tips from Tuffy Tire & Auto Service Center Lockport: Serpentine Belt Tensioner

April 14, 2024

The serpentine belt tensioner applies pressure to the serpentine belt, maintaining optimal tension to drive the accessories like the alternator and A/C compressor. At Tuffy Tire & Auto Service Center Lockport we know that the service life of the belt tensioner is the same as the belt itself, so t... More

Them's the Brakes (Brake Rotor Resurfacing)

April 7, 2024

Your vehicle's brakes wear out. It's inevitable. You'll notice it when you step on the brake pedal and feel it harder to stop, or there's vibration when you are braking. Most modern vehicles have disc brakes that each use a brake pad that press on a disc (disc brakes!) called a rotor. The fric... More